• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar
  • Advertising
  • Contact Us
  • Subscribe
  • Events
Plastics Business

Plastics Business

Strategies for Today's Plastics Processors

  • Home
  • Articles
    • Article Archive
    • ENews Archive
    • Digital Archive
  • Advertising
    • Advertising Options
    • Media Kit
    • Editorial Calendar
    • Electronic Files
  • Buyers Guide
    • 2026 Buyers Guide Form
    • Buyers Guide
  • Subscribe
  • Video Vault
  • MAPP
  • NPE 2027

Plastixs Introduces Watt-Stop Automatic Energy Management System to Help Plastics Processors Reduce Wasted Energy

Press release submitted on behalf of Plastixs.

The Watt-Stop automatically shuts down idle auxiliary equipment whenever production stops—then restarts the equipment when the process resumes, helping manufacturers lower utility costs, reduce equipment wear, and prevent wasted runtime.

Plastixs has announced it now offers the Watt-Stop, an automatic energy management system designed to help plastics processors reduce energy consumption and operating costs by automatically shutting off idle production equipment when production stops—then restarts the equipment when the process resumes.

In plastics processing facilities, auxiliary equipment such as grinders, conveyors, blowers, pumps, material loaders and compressed-air systems will continue running even when the primary production machine stops. This unnecessary operation consumes energy, increases utility costs, creates ambient heat and adds to machine wear and tear.

Watt-Stop addresses these problems by monitoring the operating status of a primary production machine and automatically controlling connected auxiliary equipment. When production stops, the system shuts down designated equipment. When production resumes, Watt-Stop automatically restarts the system, without requiring operators to manually perform shutdown and restart procedures.

“Manufacturers are continually looking for practical ways to reduce operating costs,” said Mickey Blyskal, General Manager of Plastixs. “Watt-Stop helps address an often-overlooked source of energy waste by ensuring auxiliary equipment operates only when needed. By turning this equipment off when it’s not in use, Watt-Stop can help users reduce energy costs while maintaining efficient operations.”

Automatic energy management helps eliminate idle energy consumption
Watt-Stop is designed for a range of plastics processing applications, including:

  • Granulators & Grinders
  • Compressed Air Conveying Systems
  • Line Vac Systems
  • Air Knives & Blow-Off Systems
  • Loaders & Feed Systems
  • Cooling Pumps
  • Exhaust Fans
  • Blowers
  • Conveyors and other auxiliary equipment

The system is available for 110V, 208V, 230V and 460V systems, supporting a range of industrial equipment requirements.

Addressing hidden costs in grinding and compressed-air applications
Depending on the application and operating conditions, Watt-Stop typically delivers a return on investment within months. Users of grinders and compressed air systems are among the processors that can benefit most.

According to Plastixs’ preliminary savings models, a typical grinder and blower system can continue consuming approximately 45% of full-load power while idle. According to one scenario, connecting five grinder systems to Watt-Stop would result in annual savings of $18,486.

Compressed air applications also present substantial savings opportunities. Plastixs estimates that a continuously operating 1.5-inch Line Vac can contribute approximately $9,366 in annual compressor energy costs—the Watt-Stop automatic shutoff reduces operating costs by up to 95%.

Actual savings depend on equipment configuration, operating schedules, energy rates and the amount of idle time eliminated. Plastixs can help processors assess their applications and estimate potential savings based on facility-specific operating conditions.

Supporting energy efficiency and equipment longevity
In addition to reducing utility costs, limiting unnecessary equipment runtime can help reduce wear on motors, bearings, blowers and pumps. Watt-Stop also supports more consistent energy-management practices by automating equipment shutdown and restart sequences rather than relying solely on operator intervention.

Depending on the equipment, application, and applicable program requirements, some installations may qualify for energy-efficiency incentives or utility rebates.

Plastics processors interested in identifying energy-saving opportunities in their facilities can learn more about Watt-Stop at https://www.plastixs.com/watt-stop/.

About Plastixs
Plastixs, a Globeius company based in Shrewsbury, Massachusetts, manufactures and distributes products for the plastic processing and industrial manufacturing industries. For more than 25 years, the company has focused on solutions that help improve production uptime, equipment performance, and process efficiency.

Plastixs offers a range of products, including plastic leak detection systems, mold cooling solutions, manifold assemblies, high-temperature hoses and fittings, material handling hoses, and mold maintenance products. The company also provides technical support to help customers address operational and equipment challenges across new and existing systems.

Filed Under: Press Release Tagged With: News

Primary Sidebar

- Advertisement -

- Advertisement -



The Official Publication of Manufacturers Association for Plastics Processors
© 2026All Rights Reserved
Peterson Media Group | plasticsbusiness@petersonmg.com
785.271.5801
2150 SW Westport Dr., Suite 401, Topeka KS 66614