Press release submitted on behalf of LS Mtron.

Most molders specialize in processing either thermoplastics or thermosets.
Not so for GMR Companies, which, across four brands, 13 facilities, four states and two countries, maintains a roughly 70-30 split, with thermosets accounting for the majority of the materials it processes.
That level of flexibility requires suppliers and vendors with an equally broad understanding of the various molding disciplines. When GMR Companies recently surveyed the market for two new presses, LS Mtron’s range of capabilities helped the company stand out — even among suppliers GMR had worked with in the past.
“Part of that is what the two machines have done. Part of it is that they’ve handled both sides of our business. Thermoset is a different animal from thermoplastic, and a builder that can support us on both is worth something to a company like ours,” said Raffaele Giancola, operations manager for GMR, which employs about 500 people.
With more than 220 injection and compression molding machines spread across plants in Ohio, Pennsylvania, North Carolina, Mississippi and Mexico, GMR has extensive experience working with a wide range of suppliers. Trying a new vendor can be a leap of faith, but since its first LS Mtron acquisitions last year, GMR has become a believer.
“Our engineers did their research and found the LS Mtron presses, and discovered their prices were very competitive, and we decided to go with them,” Giancola explained. “And then once we started working with the first one, we knew we’d found the right partner to make a second purchase.”
Built to fit
Size constraints were a factor in the first LS Mtron machine GMR acquired — an 1,800-ton injection molding machine that represents the biggest in a portfolio that includes presses as small as 60 tons.
Before installing the LSG-1800H at a plant in Jefferson, Ohio, GMR declined to bid on some jobs because it simply didn’t have a big enough machine. The logistics of tooling changes also raised safety concerns.
“The 1,800-ton was bought to solve a specific problem,” Giancola explained. “Our largest molds can’t come in over the tie bars — we don’t have the ceiling height or the crane capacity in that bay — so the only way to get them in was to split the mold, set it in two halves, and put it back together in the press. That’s slow, and it’s one more thing to get right on every changeover.”
To make mold changes easier, LS Mtron equipped GMR’s new machine with an optional tie-bar retraction technology that allows operators to separate the tie bars at the push of a button.
Now, GMR is able to take on more jobs quickly and safely.
“On the 1,800-ton, it changes over almost weekly because that’s where our largest tooling runs,” Giancola said. “Being able to retract the bar and side-load the mold in one piece takes a couple hours out of every changeover and removes several crane picks along with it. The safety side matters as much as the time — setting a mold in halves means more picks, more time working inside the machine with tooling suspended, and hands near pinch points while you line the two sections up.”
Set up for thermosets
After its initial experience with LS Mtron, GMR pivoted to address a second problem. While it doesn’t invest in new machinery often, the performance of one of its thermoset presses at its plant in Ashtabula, Ohio, made a clear case for replacement.
“The older press generated significant scrap and required constant adjustments to keep production running efficiently. Operators had to continually tweak settings and use different techniques to maintain consistent performance,” Giancola said.
Compared with the machine it replaced, the 390-ton LSG-310E GMR selected from LS Mtron has represented significant gains in performance. Because it runs phenolics, epoxies, DAP, polyester and vinyl ester, as well as BMC and SMC, GMR opted for a canola-phenolic conversion package and a stuffer with its new machine.
“Two things sold us on the machine. First, the pricing was competitive for the quality of press we were getting — that’s not always true in this market. Second, it’s technician- and operator-friendly,” Giancola said.
Operators using the old machine struggled to maintain process stability, which, in addition to creating scrap, hurt cycle times.
With the LSG-310E, that’s no longer an issue.
“The press it replaced took constant adjustment to hold a job. We expected a machine that would hold the process on its own and let us run high volume without babysitting it. … With fewer adjustments needed and settings that stay stable for longer, we have been able to reduce scrap, simplify operation and run with greater consistency,” Giancola said.
Investment ROI
Thermoplastics and thermosets present different challenges, but success often comes down to the same fundamentals: process stability, reliability and strong partner support.
For GMR, LS Mtron has delivered. While competitive pricing initially drew the company to consider LS Mtron, the machines have provided additional benefits over the past year, including energy efficiency and ease of operation.
Giancola praised LS Mtron for establishing a strong working relationship from the outset. Training and on-site support helped ensure a smooth transition with both machines, an especially important factor with the LSG-310E given the challenges operators had faced with the press it replaced.
Ease of use has been particularly noticeable on the plant floor. For a molder that has historically been agnostic about the machines it runs, GMR was impressed by how quickly operators adapted to the LS Mtron presses.
“A press your people can actually run is a press that makes good parts,” Giancola said.
That support began during installation and startup, when LS Mtron technicians worked alongside GMR’s team to get both machines running properly.
“Support has been good,” he said. “When we started both presses up, they had their technicians here on site with us until everything was running the way it should. That’s not a small thing on a first purchase from a builder you haven’t worked with before.”
The two machines have delivered different kinds of returns. The LSG-310E has improved day-to-day production, while the LSG-1800H has overcome physical barriers that previously complicated mold changes and limited the jobs GMR could pursue.
“The 310E has been on high-volume production since we installed it, and it’s the bigger surprise of the two. Scrap is limited, and the jobs run noticeably smoother than they did on the press it replaced. On the old machine, we were constantly adjusting the press to keep the process where we wanted it. On the 310E, we run the same work without those adjustments. That’s operator time back, and it’s more consistent parts,” Giancola said.
The LSG-1800H, meanwhile, has demonstrated its value by eliminating a physical constraint that previously added complexity to changeovers and limited the jobs GMR could accept.
“The tie bar is the clearest example of why we’d consider LS Mtron again. It solved a constraint at the machine instead of through a building project; raising the bay or putting in a bigger crane would have cost real money and real downtime.”
Whether a molder is coping with space constraints, process control or other challenges, new technologies from LS Mtron provide practical solutions, company President Paul Caprio said.
“GMR’s needs are a good example of why flexibility and experience matter. We’ve helped a lot of molders processing thermosets and thermoplastics, and operating both big and small machines, so GMR’s needs are not unusual for us,” Caprio said. “Our job is to listen to what our customers need and work with them to be sure we’re implementing a solution that exceeds expectations.”
Over the past year, that’s been GMR’s experience.
The challenges facing the company’s newest machines were different, but the results are the same: strong molding performance, high-quality parts and less time wasted on managing the process.
The presses have demonstrated the value of working with an OEM that understands the full breadth of its molding operations.
About LS Mtron Injection Molding Machine
LS Mtron is part of the LS Group, a South Korean-based conglomerate with over 25,000 employees, annual revenues of over $45 billion and profit of approximately $2 billion. LS Mtron Injection Molding Machine (LS IMM), a division of LS Mtron, was started in 1969 by South Korean tech giant LG Corporation, one of the world’s largest plastic molders. Founded initially to satisfy their own production needs for injection molded components used in their world-famous TVs, appliances, electronics, and other products, today LS IMM produces thousands of machines a year, not only for use by our network of LS-related and LG-founded companies but also for thousands of molders around the world.
Since 2021, the LS Group has invested $722 million in a number of its businesses in the U.S., demonstrating unwavering commitment to long-term growth and innovation.
Beginning with the development of Korea’s first injection molding machines, LS IMM prides itself on quality, service and fast deliveries. The combined strength of the LS family of companies allows us to solve many of the world’s supply-chain challenges.
Because of this, LS IMM can provide new custom molding machines to our customers in North America in just 100 days from casting to cargo, or even faster from our stocked inventory.
