A look at temperature control equipment for a wide range of industries, designed to maintain and regulate temperature conditions for product quality, energy efficiency, operational reliability and safety, whether through thermostats, temp controllers, chillers and heaters, or essential components of sensors and probes.
Conair Group
724.584.5500
www.conairgroup.com
Conair, Cranberry Township, Pennsylvania, highlights its Thermolator® TW-T, which is built for reliable, consistent temperature control in plastics processing. Engineered with increased cabinet airflow, high-efficiency pumps and a leak-free heater gasket, the TW-T maintains precise temperature control with less need for adjustments. The simplified touchscreen interface features an Auto Cool Stop, saved recipes and a pump run-time counter. So, any processor – new or experienced – will be able to operate with minimal instruction. The TW-T’s compact footprint saves floor space and provides advanced energy savings while delivering reliability.
Globeius
305.889.1782
www.globeius.com
Globeius, Miami, Florida, offers Flosense Flexible Flow Monitoring to precisely control injection mold cooling. Flosense eliminates part shrinkage variation, warping and defects by monitoring mold flow, temperature and pressure in real time and spotting leaks instantly. It monitors Delta T and Delta P through built-in sensors and a visual display, and installs easily on mold heaters, manifolds and cooling circuits. Alerts reduce downtime, and operators can set alarms to respond to critical process changes. Flosense allows faster changeovers and more repeatable production runs. OPC-UA and Euromap are ready to integrate with Industry
4.0 technologies.
INCOE Corporation
248.616.0220
www.INCOE.com
NCOE Corporation, Auburn Hills, Michigan, offers customers three choices of hot runner temperature controller solutions, including the I-Series, I-Series Pro and the M-Series. All three have advanced PIDD control logic providing repeatable operation and temperature control accuracy. Packed with user-friendly features within a robust and reliable software architecture, factory environment resistant cabinet, all at a very attractive low price and performance ratio. Lastly, but importantly, power and thermocouple cables are supplied as options to match a customer’s existing and a new mold’s required connectors and wiring sequence.
Mokon
716.876.9951
www.mokon.com
Mokon, Buffalo, New York, features the Hydrotherm – a compact and portable circulating water temperature control system engineered to improve accuracy, reliability of operation and increase output. The system is equipped with stainless steel as the main component for wetted surfaces, including a stainless steel pump, heater canister and pump suction manifold. The Hydrotherm is available in heating capacities up to 12 kW, pumping capacities up to 2 HP and a maximum operating temperature of 250° F (121° C). The base models are built to standard specs and ready to ship within 48 hours of purchase.
PCS Company
800.521.0546
www.pcs-company.com
PCS Company, Fraser, Michigan, introduces the TC5600 Hot Runner Temperature Controller. This system enhances the operator experience with a 15.6″ intuitive touchscreen interface, making set-up and adjustments faster and more user-friendly. The Easy View feature offers a clear visual representation of the hot runner and mold, with temperature settings displayed for efficient and precise adjustments. Functional highlights include synchronous heating and cooling, which quickly bring the entire system to a uniform temperature, and Mold Recognition, allowing storage of multiple unique molds and settings to minimize costly downtime. The TC5600 continuously monitors current draw, automatically flagging anomalies to detect potential leaks and enabling an immediate response. Heater aging is indicated, and the TC5600 has full internet connectivity. The result: greater stability, efficiency and quality in every production.
Plastixs
888.792.2223
www.sterlco.com
Plastixs, Shrewsbury, Massachusetts, offers its patented LinkedXValve system, which allows a single lever to operate mold cooling supply and return lines simultaneously. Experience faster mold changes with a reduced chance of error. This proprietary valve linkage system can be installed onto standard manifolds and brass ball valves, reducing manifold footprint while increasing efficiency. Actuate valves from a single side of a manifold assembly.
LinkedXValve prevents spills and lost production time. Available in inlet-outlet sizes of 1″ or 1.5″ and port sizes of 3/8″ or 1/2″ for 8, 12, 16, 24 or 32 total ports.
Sterling
261.641.8600
www.sterlco.com
Sterling, New Berlin, Wisconsin, offers the TC130 Series Temperature Control unit. Sterling’s most advanced TCU features state-of-the-art controls and a 5″ color touch screen. Intelligent capabilities include Pressure Adaptive Technology, which utilizes analog pressure transducers. This ensures that the unit will temporarily decrease temperature during a momentary or sustained press drop, rather than instantly shutting down. USB data logging improves analytical and troubleshooting capabilities. The unit automatically cycles between half and full heat, and its independent high-temperature safety thermostat protects from heater overload. The TCUs are backed by a three-year controller warranty, a two-year parts warranty and a one-year factory labor warranty.
Wittmann USA
860.496.9603
www.wittmann-group.com
Wittmann, USA, Torrington, Connecticut, offers the TEMPRO D250-M temperature controller. Built for reliable performance and easy operation, its magnetically coupled pump eliminates seals, minimizing wear and maintenance. With infinite mold purging and direct cooling, it ensures smoother production and precise temperature control. The Wittmann 4.0 interface comes standard for seamless connectivity. For added efficiency, Wittmann offers an optional EcoDrive frequency-controlled pump.