DELMIAWorks Webinar: Mastering Plastics Manufacturing
2025-03-19 11:00 (America/New_York)
Wednesday, March 19th, 11:00 AM ET

As an engineer in the plastics manufacturing industry, you know running your business with software not designed specifically to address the unique needs of plastics processing can be a very frustrating experience. There is a better way.
Join us on Wednesday, March 19th at 11:00 AM ET to learn how the most successful molders, extruders, compounders, thermoformers, and other plastics processors are overcoming the challenges of plastics manufacturing, including:

Managing family tools, tracking parison/flash and regrind, recipes/blends, and cavitation
Inventory management, including shelf-life, FIFO/LIFO, and raw materials
Knowing exactly what is running, where it is running, and for precisely how long
Scheduling tool and die-based, multi-level BOMs to reflect critical interdependencies

Learn how plastics manufacturers are leveraging DELMIAWorks to streamline operations, control costs, boost profitability, and stay competitive in a challenging market.

Beaumont Moldflow Webinar Series: Hot Gate Insulation
2025-03-20 12:00 - 13:00 (America/New_York)
Thursday, March 20th – Jerry Rooney
Hot Gate Insulation – Is the Default Assumption Safe?
Beaumont is holding this FREE webinar series showcasing tips, tricks, and some of the latest features Moldflow has to offer. Come listen in, ask questions and share with your co-workers! There are three remaining webinars each covering different Moldflow topics all starting at noon EST.
Hot Gate Insulation – Is the Default Assumption Safe?
By default, Moldflow assumes good insulation between Hot Gate elements and Part elements. Consequently, the mold temperature near the gate is quite uniform, and shows little evidence of the heat load from the nearby hot gate. The goal was to determine if manipulating the insulation properties of the hot gate produces notably different results in terms of packing and warpage. The results show increases in local shrinkage near the gates and slight changes to warpage magnitudes. Warpage trends remained the same in all scenarios. Additional simulations should be performed to determine the trends on a variety of materials and part designs. Lastly, future work should involve taking actual temperature measurements from a production tool and comparing to simulation outputs.

2025 Plastics Recycling Conference
2025-03-24 - 2025-03-26 | Gaylord National Resort & Convention Center, 1500 Gaylord Trail, Grapevine, TX, 76051, United States
The 2025 Plastics Recycling Conference is set for March 24–26, 2025, at the Gaylord National Resort & Convention Center. The host hotel address is 1500 Gaylord Trail, Grapevine, TX 76051.
WHAT WILL THE SESSIONS DISCUSS THIS YEAR?
Review all of the details of our three-day schedule on the Session Lineup (coming soon).
WHICH COMPANIES ARE EXHIBITING THIS YEAR?
Check out all of the details on this year’s growing list of Sponsors and Exhibitors.
WHO ATTENDS THE CONFERENCE?
The Plastics Recycling Conference annually brings together top executives and decision-makers from plastics processors, converters, global brands, resin manufacturers, government agencies, trade groups and other key sector categories. Find out more on our Event Overview page.
I HAVE A QUESTION ABOUT REGISTERING, SPONSORING OR SOMETHING ELSE.
We’re happy to help! Head over to our Contact Us page and choose your preferred method of reaching out to our team.

ProMolder 2: The next step after ProMolder 1
2025-03-31 08:30 - 2025-04-04 16:30 (America/Chicago) | Charlotte, North Carolina
ProMolder 2 is primarily an in-person seminar with our expert instructors, but we occasionally offer this popular training course virtually so your team can learn from anywhere with a high-speed internet connection. After completing ProMolder 1 and earning a Paulson Training Certificate, team members are ready for ProMolder 2, a 5-day intensive seminar.
Learn about critical injection molding topics such as:

Plastic properties and behaviors that impact part quality
Science behind successful molding
Analysis of part defects, causes, and solutions
Practice with our injection molding simulator
New math for molders
More topics included

Upcoming dates:
March 31-April 4 | Charlotte, NC
May 19-23 | Elk Grove Village, IL
Book via the TPC Training website

Polymer Mechanical and Chemical Testing - A FREE Webinar from Chase Plastics
2025-04-01 14:00 - 15:00 (America/New_York)
Join us for an insightful webinar focused on the mechanical and chemical testing of polymers. This webinar will delve into the essential techniques used for characterizing polymer materials and conducting failure analysis. You’ll gain a deeper understanding of how these testing methods reveal the performance, durability, and underlying issues in polymers. Whether you’re looking to enhance your knowledge of polymer behavior or improve your failure analysis strategies, this webinar is a must-attend!
Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.
FREE Technical Webinar Library
Discover our extensive collection of technical webinars, available for you to watch at your leisure…free of charge! Simply visit: https://chaseplastics.com/webinars/

Beaumont Moldflow Webinar Series: STAMP
2025-04-10 12:00 - 13:00 (America/Chicago)
Thursday, April 10th – Dave Corsi
STAMP – Shrinkage Test Adjusted Mechanical Properties
Beaumont is holding this FREE webinar series showcasing tips, tricks, and some of the latest features Moldflow has to offer. Come listen in, ask questions and share with your co-workers! There are three remaining webinars each covering different Moldflow topics all starting at noon EST.
STAMP – Shrinkage Test Adjusted Mechanical Properties
An accurate simulation is only as accurate as the information provided. One of the most important inputs in plastic flow simulation is the material file itself. If a material file is missing critical tested data, then the simulated results could be compromised. Simulation software generally uses a simplified thermo-viscous-elastic residual stress model due to the lack of good material data in anisotropic thermo-viscoelastic residual stress calculations and crystallization. This model has a constant solidification temperature with available material data obtained under laboratory conditions. It can generally provide acceptable results helping users optimize the processing conditions for mold and part design. However, model calibration and correction can further improve the predicted accuracy. Moldflow uses measured shrinkage data to improve the shrinkage and warpage prediction for Midplane and Dual Domain models known as CRIMS “Corrected Residual In-Mold Stress”. STAMP or “Shrinkage Test Adjusted Mechanical Properties” is a shrinkage correction model that will use the measured shrinkage data, obtained from rectangular plaque moldings, to calibrate modulus, Poisson’s Ratio, and Coefficient of Thermal Expansion (CTE). This new model gives additional accuracy for 3D simulations and is only available for Autodesk Moldflow.

Moldex3D Symposium 2025
2025-04-24 - 2025-04-25 | Saint John’s Resort, 44045 Five Mile Rd., Plymouth, MI
Molding Intelligence
Moldex3D Symposium 2025 is on the horizon!

Date: April 24-25, 2025
Location: Plymouth, MI, USA

From April 24th to 25th, numerous innovators and industry leaders will gather at the Moldex3D Symposium 2025. To unlock the limitations of the plastic molding industry, they will present molding challenges and solutions with participants across a wide range of industries.
* This is a free event! For more details about this event, please stay tuned to our event website.https://www.moldex3d.com/events/user-meeting/moldex3d-symposium-2025/

AUTOMATE Conference 2025
2025-05-12 - 2025-05-15 | Huntington Place
The Automate Conference puts you side-by-side with automation experts who know how to implement, optimize and expand automation—giving you insights to put into practice right away.

The Automate Conference is produced by the Association for Advancing Automation (A3). It also serves as the North American edition of the International Symposium on Robotics (ISR) sponsored by the International Federation of Robotics.
Meet up with fellow MAPP members at the show!

2025 Environmental, Health and Safety Summit
2025-05-13 - 2025-05-15 | Renaissance Indianapolis North Hotel, 11925 N. Meridian St., Carmel, IN, 46032
May 13-15, 2025 | Indianapolis, Indiana
The Environmental, Health and Safety (EHS) Summit is designed to share best leadership and safety practices with industry professionals hoping to achieve world-class safety within their companies.
This one-of-a-kind learning and networking conference will focus on uniting manufacturing executives from across the United States. Attendees will learn best practices in environment, health and safety along with becoming a better leader.
This Summit promises to provide high-level safety professionals with implementable ideas they can take back to their facilities to improve their operations and achieve world-class safety.
For registration information, agenda, hotel information, details about event sponsorships and/or to submit an awards nomination form, visit MAPP’s website at www.mappinc.com/events/2025-ehs/

ProMolder 2: The next step after ProMolder 1
2025-05-19 08:30 - 2025-05-23 16:30 (America/Chicago) | Elk Grove Village, Illinois
ProMolder 2 is primarily an in-person seminar with our expert instructors, but we occasionally offer this popular training course virtually so your team can learn from anywhere with a high-speed internet connection. After completing ProMolder 1 and earning a Paulson Training Certificate, team members are ready for ProMolder 2, a 5-day intensive seminar.
Learn about critical injection molding topics such as:

Plastic properties and behaviors that impact part quality
Science behind successful molding
Analysis of part defects, causes, and solutions
Practice with our injection molding simulator
New math for molders
More topics included

Book via the TPC Training website

RJG's Part & Mold Design for Injection Molding: Opelika, Alabama
2025-05-20 - 2025-05-23 | Opelika, Alabama
Course Description
To successfully design and produce plastic injection molds and molded components that meet cycle time, cost, part quality, and lead time requirements, networks of molding professionals need to have a common language and an understanding of core elements of plastic behavior. This course will help you understand the inter-relationships of part design, mold design, and quality processing, allowing you to better:

Maximize the likelihood of successful production
Mitigate rework
Reduce development costs
Decrease the risk of less-than-optimum tooling conditions
Minimize nonconformities
Speed up time to market

Class topics address good manufacturing processes (GMP) for: plastic part design, fundamental material characteristics, robust mold designs, necessary processing characteristics, molding non-conformities, and tolerances. The course also discusses how part design and material selection affect the cost of tooling and piece price. Since hands-on-learning is a core component of our training, we utilize industry examples as reference, then dive into evaluating and improving designs. Attendees will work in groups to examine parts to identify where non-conformities will occur and methods to improve those risks.

Smart Innovation, Bigger Returns: Cutting Hidden Costs in Injection Molding
2025-05-20 13:00 - 14:00 (America/Halifax)
May 20, 2025 1:00 PM–2:00 PM EDT
Free Webinar Presented by Bob Reese, RJG

This presentation explores how molders can leverage advanced technology to uncover the hidden costs in the injection molding process. Attendees will learn how strategic investments in technology not only streamline operations but also generate high returns through increased efficiency, reduced waste, and improved product consistency. We will walk through real-life ROI examples and utilize a specialized calculator to demonstrate the tangible benefits these innovations can bring. Discover the significant savings potential of adopting these solutions to transform your business and maintain competitiveness in an evolving market.

FREE Webinar from Chase Plastics - Polymer Basics
2025-05-28 13:00 - 14:00 (America/Chicago)
May 28 at 1 p.m. – 2 p.m. (CDT)

Gain a clear understanding of polymers in this focused webinar covering their structure, types, and key physical and chemical properties. We’ll explore how polymers are classified, what makes them unique, and how their characteristics impact performance and applications across industries. This is Part One of the Plastics101 series.

Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

Moldex3D Webinar: Using Simulation to Optimize Injection Molding Cycle Time
2025-06-11 14:00 - 15:00 (America/Detroit)
Wed, Jun 11, 2025 at 2 PM (EDT)

In the realm of manufacturing, cycle time is a critical factor that directly impacts production capacity, cost-effectiveness, and overall competitiveness. With the ever-increasing demand for faster turnaround and improved efficiency, it has become imperative to harness the power of simulation to optimize injection molding cycle time.
Whether you are a design engineer, production manager, or industry professional looking to enhance your knowledge and skills in injection molding optimization, this webinar promises to provide you with invaluable insights and practical solutions to elevate your manufacturing processes.
What Attendees Will Learn?

Understanding the significance of cycle time in injection molding and its impact on production efficiency and profitability.
Unveiling the powerful simulation tools and methodologies available to accurately predict and optimize cycle time.
Demonstrating real-world case studies, expert tips, and best practices showcasing successful outcomes in using simulation to optimize injection molding cycle time.

Mr. Anand Bora is an alumnus of the University of Massachusetts, Lowell. He received a BS in Polymer Engineering in 1998 and an MS in Plastics Engineering in 2000. During his 20 years in the automotive industry, he has worked at OEMs, tier-1, and tier-2 suppliers in Design, Manufacturing, and Business Development. He is very knowledgeable not only in injection molding and compression molding, but also in blow molding, Dimensional Management, and Virtual Reality. At Moldex3D, he is involved in ensuring customers’ success, meaning your success.

Chase the Knowledge Webinar: Understanding Polymer Modification (Part Two of the Chase Plastics 101 five-part series)
2025-06-25 02:00 - 15:00 (America/Detroit)
Wed, Jun 25, 2025 2:00 PM – 3:00 PM EST

Join us for an informative webinar on Polymer Modification, where you’ll gain a foundational understanding of how polymers are tailored for specific applications. This session will cover the various types of polymer modification, including a review of blends, alloys, and copolymers. We’ll also explore the roles of reinforcements, fillers, and impact modifiers, and take a closer look at common additives and stabilizers used to enhance polymer performance. This is Part Two of the Plastics101 series. Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

Moldex3D Webinar, Moldiverse: The Cloud Ecosystem Elevating Your Molding
2025-06-25 14:00 (America/Detroit)
Wed, Jun 25, 2025｜2:00 PM EDT
In plastic injection molding process, several critical factors must be considered. Material property, injection molding machine process parameters, and the level of expertise all interact and have an effect on the final production outcome.
To elevate the quality of your simulation and injection molded parts, Moldex3D launched the cloud platform, Moldiverse, as an ecosystem offering material databank, smart molding solutions, online learning resources, and trial software. The material databank, Material Hub Cloud, offers more than 8,700 thermoplastics and you can find, compare, look for alternative materials with just a few clicks. iMolding Hub provides machine characterization that allows your simulation to take into account the actual machine’s response and potentially reduce the number of mold trials. University, the online learning resources hub, provides Moldex3D software training, plastic E-learning, and on-demand webinars, all can be accessed anytime, anywhere. Join the webinar to find out what Moldiverse can bring you to make your simulation smarter, faster, and more elevated.
What will attendees learn?

What is Moldiverse
What can Moldiverse bring you
Why should you join Moldiverse

Speaker Intro

Showcase Your Innovation at the 2025 MAPP Innovation Award Competition!
2025-07-11
Are you ready to shine? The 2025 Innovation Award Competition is your chance to highlight groundbreaking advancements in Automated Manufacturing Solutions or Artificial Intelligence Incorporation.
Why Enter?

Gain industry-wide recognition for your cutting-edge innovations
Inspire peers and drive progress across the manufacturing sector
Compete for a prestigious award judged on Impact, Innovation, Sustainability, Value, and In-House Creation

Multiple submissions encouraged! Submit your best ideas before the July 11, 2025 deadline. All entries will be reviewed and sent to membership for voting.
Winners will be honored at the 2025 Benchmarking and Best Practices Conference, October 1-3 in Indianapolis, IN.
Questions? Contact us at info@mappinc.com.
Submit your entry today: Click here for the Award Submission Form
If you have questions or issues, please don’t hesitate to reach out to us at info@mappinc.com

For more information and to register:
https://firstresource.qualtrics.com/jfe/form/SV_3PIDFCiiqT3YSjk

What's New in Moldex3D 2025
2025-07-23 14:00 - 15:00 (America/Detroit)
Wed, Jul 23, 2025｜2:00 PM EDT

Every year, Moldex3D releases a new major version, which includes the latest and greatest features that were developed over the past year! For the Moldex3D 2025 release, we are excited to announce numerous upgrades to the current platform:

1.AI Optimization for DOE Analysis

2.New GD&T Tools

3.Weld Lines Output as Surfaces

4.User-defined Result Criteria

5.Cooling Channel Loop Wizard

6.View Cube & Unit System Mobility

…and MUCH MORE!!
What will attendees learn?

New Solver Capabilities & Database Support Options
Enhanced & Newly Added Pre-processing Tools
Updates to Project Management & Automation
Additional Upgrades to Already Existing Modules

Alex has been with Moldex3D for nearly nine years. In addition to being an excellent senior engineer, he is responsible for training users to become proficient with our software and sharing various practical tips to help them use it more effectively. Alex is also an outstanding speaker, frequently hosting presentations on software functionalities, earning widespread recognition and praise.​

Chase the Knowledge Webinar: Polymer Testing (Part Three of the Chase Plastics 101 five-part series)
2025-07-30 14:00 - 15:00 (America/Detroit)
Wed, Jul 30, 2025 2:00 PM – 3:00 PM EST

Join us for an informative webinar on Polymer Testing, where you’ll get a clear understanding of what polymer test data really means. In this webinar, we’ll walk through how to read a Technical Data Sheet (TDS), review key material properties, and explain the most common tests used in polymer evaluation. Learn how to translate test results into practical insights for material selection and performance. This is Part 3 of the “Chase Plastics 101” series. Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

Moldex3D Webinar: Bridging the Gap Aligning Simulated and Real-World Pressure Data
2025-08-20 14:00 - 15:00 (America/Detroit)
Date：Aug 20, 2025
Time： 2:00 PM EDT

In high-pressure applications like injection molding, accurately predicting pressure loss across the entire system is critical for diagnosing and preventing molding issues. While many focus solely on maximum pressure values, it’s the pressure trends and contours that offer the most insight into flow behavior, imbalance, and potential defects.
This webinar will explore how to interpret pressure distribution more effectively using Moldex3D, helping you uncover root causes of issues such as short shots, warpage, or excessive clamp force requirements. Learn how to go beyond surface-level metrics and leverage full pressure analysis to make smarter design and process decisions—before you mold.
What will attendees learn?

How to identify and eliminate common LSR/ silicone molding issues—such as air traps, flashing, short shots, and uneven curing—through simulation.
Gain practical strategies to improve simulation accuracy through better material data, boundary condition settings, and interpretation of pressure contours and trends.

Chase the Knowledge Webinar: Polymer Fabrication 101 (Part Four of the Chase Plastics 101 five-part series)
2025-08-27 11:00 - 12:00 (America/Denver)
Wed, Aug 27, 2025 11:00 AM – 12:00 PM MST / 1:00 PM – 2:00 PM CST / 2:00 PM – 3:00 PM EDT

This webinar provides an overview of key polymer fabrication methods, including extrusion, blow molding, thermoforming, and injection molding. You’ll learn how each process works, along with a general understanding of how raw materials are converted into finished plastic products. This is Part 4 of the “Chase Plastics 101” series. Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

FREE Technical Webinar Library
Discover our extensive collection of technical webinars, available for you to watch at your leisure…free of charge! Simply visit: https://chaseplastics.com/webinars/

Tee Up for a Great Cause – PCS Company Golf Outing, Sept. 5
2025-09-05 09:00 - 18:00 (America/Detroit) | Cracklewood Golf Course, 18215 24 Mile Rd., Macomb, MI
Get ready to tee off!
Join PCS for its 3rd Annual PCS Company Golf Outing – a day of friendly competition, networking, and fun to support a great cause.
This year, PCS is proud to sponsor the American Cancer Society, with proceeds from the event supporting their mission to fund cancer research, education, and patient support programs.
? Cracklewood Golf Course
18215 24 Mile Rd., Macomb, MI
? Friday, September 5th, 2025
? Check-in: 9:00–10:00 a.m. | Shotgun Start: 10:00 a.m. (EDT)
What’s included:

18 holes of golf
Complimentary driving range
3 drink tickets per golfer
Hot dog lunch at the turn
Buffet dinner after the round

Whether you’re swinging solo or registering a foursome, we’d love to have you out on the green!
Interested in donating a prize or have questions?
Contact: jsaba@pcs-company.com
Registration Deadline: August 22, 2025
Let’s make this year’s outing the best one yet—we’ll see you on the course!
For registration, sponsorship information or more details, visit PCS Company 2025 Golf Outing.

Federated Complimentary Webinar: Cybersecurity
2025-09-18 13:00 - 13:30 (America/Chicago)
Cybersecurity
Thursday, September 18, 2025 (1:00 PM Central)
30 minutes | Complimentary | Advance registration required
The webinar covers emerging cybersecurity threats, such as ransomware attacks and AI-powered phishing. It also highlights trends like double extortion, Ransomware-as-a-Service (RaaS), and attacks on critical infrastructure. The presentation will feature case studies of major ransomware incidents, including the CNA Financial and Royal Mail attacks, and emphasizes the need for strong cybersecurity measures to defend against these threats.
WHAT YOU WILL LEARN
➤ The latest tactics cybercriminals use, including AI-generated phishing emails and deepfake videos.
➤ Insights into how you could prepare for and respond to ransomware attacks, such as regular risk assessments and a layered security approach.
➤ Why employee training and awareness are vital for stopping cyberattacks, as well as the importance of ongoing monitoring and incident response planning.
➤ Tips for getting started with cybersecurity, including how to choose the right provider and tools for your business.
WHO SHOULD ATTEND

Business Owners / Operators
Risk Managers
Operations Managers
HR Professionals

Chase the Knowledge® Webinar: Common Polymers 101 (Part Five of the Chase Plastics 101 five-part series)
2025-09-24 14:00 - 15:00 (America/Detroit)
Wed, Sep 24, 2025 2:00 PM – 3:00 PM EST

Join us for the Common Polymers 101 webinar on September 24th, where we’ll take a closer look at widely used plastics in manufacturing. This session includes a quick review of material selection and dives into commodity polymers, ABS, Nylon 6 & 6/6, PC, TPEs, and specialty polymers—offering practical insight to help you choose the right resin for your end-use applications. This is the final part of the “Chase Plastics 101” series. Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

2025 Benchmarking and Best Practices Conference
2025-10-01 - 2025-10-03 | Indianapolis Downtown Marriott, Indianapolis, IN
Mark your calendars for October 1-3, 2025, as we gather at the Indianapolis Marriott Downtown for this premier event!
The Conference Committee is hard at work planning an incredible program designed to inspire, educate, and connect industry leaders like you.
Questions please reach out to mkates@mappinc.com.

For more information and to register: https://www.mappinc.com/conference

K 2025 - The World’s No. 1 Trade Fair for Plastics and Rubber
2025-10-08 - 2025-10-15 | fairgrounds in Düsseldorf, Germany, Germany
The event will be held from October 8 – 15, 2025 at the fairgrounds in Düsseldorf, Germany. K 2022 exhibitors can easily register for K 2025 with their existing log-in and make necessary changes on the registration form. First-time exhibitors will be guided step-by-step through the online application process.
A special feature at K 2025 will again be the two U.S. Pavilions, organized by Messe Düsseldorf North America (MDNA) and supported by the PLASTICS Industry Association. The pavilion turnkey rental package includes a fully furnished booth, access to an attractive lounge area and the on-site service of a project manager, hostesses and interpreters. All technical work, set up and dismantling is included. Please contact Messe Düsseldorf North America at (312) 781-5180 to reserve exhibit space within the U.S. Pavilions.
The ranges on display at K 2025 will include the segments machinery and equipment, raw materials and auxiliaries as well as semi-finished products, technical parts and reinforced plastic products. K 2025 will not only be the industry’s performance barometer and its global marketplace for innovations but will also provide orientation, set sustainable economic impulses and present forward-looking trends.
K 2025 in Düsseldorf will address the mega themes climate protection, digitalization and circular economy. K 2022 already succeeded in setting strong signals in these areas by presenting sustainable solutions that will be taken to the next level in 2025. Exhibitors at the upcoming K will showcase further innovations for the responsible and value-driven handling of plastics and rubber as well as demonstrate ways that allow plastics to be managed in closed-loop systems.
The unique selling point of K in Düsseldorf is not only its extensive ranges of products and services offered by the exhibitors from all over the world but also the quality and variety of its supporting program which includes the official special show organized by Plastics Europe and Messe Düsseldorf as well as the Specials Rubber Street, Science Campus and the Start-up Zone.
To sign up as a K 2025 exhibitor for individual space visit www.k-online.com/2330. To exhibit within one of the U.S. Pavilions, contact Messe Düsseldorf North America, Telephone: (312) 781-5180; E-mail: aduering@mdna.com, and visit www.k-online.com and www.mdna.com
For hotel and travel information, contact TTI Travel, Inc. at (866) 674-3476; Fax: (212) 674-3477; E-mail: info@ttitravel.net; www.ttitravel.net
K Basics: In 1952, K was held by Messe Düsseldorf for the first time and takes place in a 3-year cycle. The latest K in 2022 registered 3,020 exhibitors from 59 countries occupying 177,516 sqm net exhibition space and 177,486 trade visitors, with 71% from abroad. For more information: www.K-online.com . For the K online magazine: K-Mag

Federated Insurance® Launches 2½-Day Risk Management Academy Offering for All Industries in November
2025-11-04 - 2025-11-06 | Federated Insurance, 1929 S Cedar Avenue, Owatonna, MN, 55060
Federated Insurance® is excited to formally invite business owners in all industries to attend our complimentary 2½-Day Risk Management Academy (RMA) offering from November 4-6, 2025. Led by risk management professionals, this session will be held at Federated®’s Home Office in Owatonna, Minnesota.
Often, business owners may find themselves so busy in the day-to-day workings of their company that they may have less time to focus on the overall safety of their business. This RMA session can help business owners learn how to prevent losses impacting their bottom line by developing risk management best practices, connecting with industry peers facing similar challenges and insurance professionals who are committed to helping owners, and applying what is learned to make a difference at their businesses.
Building a culture of workplace safety starts with business leaders. Learn more and register now to attend this valuable 2½-Day RMA to help take risk management to the next level. To reserve your spot in the upcoming session, or for more information, please contact FederatedRMA@fedins.com.

This article is for general information and recommendations for risk prevention only and should not be considered legal, coverage, financial, tax, or medical advice. There is no guarantee that this information will result in reduced or eliminated losses. This information may be subject to regulations and restrictions in your state. This information is accurate as of its publication date and is subject to change. Qualified counsel should be sought regarding questions specific to your circumstances.
At Federated Insurance, It’s Our Business to Protect Yours®
About Federated Insurance
Founded in 1904, Federated Insurance is a national insurance and risk management organization that serves the property, casualty, and life insurance needs of clients in select industries. The organization has more than 500 recommendations from state, regional, and national associations and buying groups, and is rated A+ (Superior) by industry analyst A.M. Best®.

RJG Training Webinar: Getting the Most out of CoPilot and Hub
2025-12-02 - 2025-12-04
Are you taking full advantage of your CoPilot and Hub systems? Join us December 2–4 for a free, three-day online course designed to help you unlock their full potential. Our experts will guide you through key features, best practices, and real-world examples that can help you boost part quality, improve process control, and streamline your mold change workflow.
Course Length: 3 days — 1 hour per day
Cost: Free
✅ DAY 1 🔍 Real-Time Monitoring & Alarm Strategies: Improve Quality • Learn how to efficiently view and analyze data using the CoPilot’s Cycle Graph, Summary Graph, and Previous Cycle Values. • Master tools for zooming, adjusting, and toggling multiple views, including showing individual curves with click-and-hold functionality. 🚨 Alarms: Set with Precision, Act with Confidence • Understand how to manually set alarms using high/low limits, percentages, and sigma levels. • Discover best practices for alarm settings to ensure stability, fill volume accuracy, and consistency. • Walk through real-world examples of both machine and mold alarms for practical context.
✅DAY 2 🧩 Templates & Balance Viewer: Faster Setups • What is a template and why it matters. • How to retrieve, create, select, archive, and overwrite templates with ease. • Tips for maintaining good practices in template use to support repeatability and mold setup efficiency. ⚖️ Balance Viewer: Fill and Pressure Insights
✅DAY 3 🔍Advanced Data Analysis: Detect Problems Early • View real-time and historical data from all connected CoPilot systems. • Analyze Cycle Graphs, Summary Graphs, and Previous Cycle Values to evaluate process health. • Identify drift or anomalies before they lead to part defects. • Use zoom, curve toggling, and overlay features for in-depth cycle analysis. 📈 Identify Opportunities for Improvement • Compare job performance across tools, presses, or shifts. • Spot patterns that correlate with downtime, rejects, or excessive alarm triggers. • Use HUB insights to guide continuous improvement efforts, training, and process audits.

MAPP 2026 Young Professionals Leadership Summit
2026-03-19 - 2026-03-20 | Donald E. Stephens Convention Center, Rosemont, IL
Taking place just after PTXPO in Rosemont, IL, this two-day in-person event is designed to be an intensive and immersive professional development opportunity for industry young professionals interested in growing their leadership skills and manufacturing expertise. The 2026 Leadership Summit will give attendees firm and applicable leadership skills, allow meaningful networking and problem-solving and connect with industry peers for long-lasting growth and development.

Attendees will join Jen Porett of Wipfli as she guides young professionals through a full day of leadership training. Not only will attendees focus on developing their leadership, but they will also be taken on an in-depth tour of MAPP member DEMGY Chicago and have a facilitated discussion on applicable best practices to take back to their home facility. They will also have the opportunity to contribute their own continuous improvement ideas for DEMGY Chicago to better their own operations. A networking event will also take place the evening of the first day of content.
Profile. Align. Grow. — A Leader Essentials Series
Accelerate your leadership in three powerful steps. First, know yourself: use Predictive Index insights to pinpoint your natural operating style and adapt your communication for impact. Next, set the bar: turn priorities into crisp, measurable expectations that drive alignment and accountability. Finally, coach to grow: build a repeatable coaching rhythm that unlocks performance and development in every 1:1. Together, these components create a clear path from self-awareness to team results—so you lead with confidence, clarity, and a culture of continuous improvement.

Learn your natural operating style & improve your communication (Predictive Index) — 90 minutes Discover your natural work style and what it means for how you lead, collaborate, and influence. Translate those insights into practical communication tactics you can use immediately to reduce friction, build trust, and get results across different stakeholders.
How to set clear expectations/objectives for yourself and direct reports — 120 minutes Build clarity and alignment by crafting crisp, measurable objectives, and explicit agreements. Practice framing expectations, defining success metrics, and establishing check-ins that drive accountability and performance—using templates you can apply with your team right away.
How to coach for growth and development — 120 minutes Strengthen your coaching mindset and skills to unlock growth in others. Learn to ask powerful questions, actively listen and co-create development plans that stick. Practice real coaching conversations and leave with a repeatable framework you can use.

Agenda
Day 1: Thursday, March 19
2pm – 5:30pm: Leadership Summit (Day 1), Jen Porett, Wipfli, Donald E. Stephens Convention Center, Rosemont, IL
6pm – 7:30pm: Networking Reception, Crust Brewing, Rosemont, IL
Day 2: Friday, March 20
8am – 10am: Leadership Summit (Day 2), Jen Porett, Wipfli, Donald E. Stephens Convention Center, Rosemont, IL
10:30am – 12pm: Plant tour, DEMGY Chicago, Elk Grove Village, IL

Hotel Information
Hilton Rosemont
5550 N. River Road
Rosemont, IL 60018
Doubletree Rosemont
5460 North River Road
Rosemont, IL 60018

About the Host
DEMGY Chicago is a metal to plastic solutions provider specialized in thermoplastic injection molding, as well as the design and manufacture of its own molds. They cater to original equipment manufacturers, predominantly in the medical, aerospace, and industrial sectors.They manufacture high-end parts in large or small quantities, from simple components to highly complex assemblies, made to customer requirements. With their vast expertise in this field, combined with the latest state-of-the-art machines and technology, DEMGY Chicago is able to produce high-quality parts with speed.
Click here to learn more about DEMGY Chicago.

Thank you to our event sponsors!

Experience Molding Intelligence at the Moldex3D Symposium
2026-04-23 - 2026-04-24 | Saint John’s Resort, 44045 Five Mile Rd., Plymouth, MI
Don’t miss this chance to connect with experts from GM, BASF, Molex, Moldex3D, and more. We’ll dive deep into AI-driven automation, advanced materials, and the future of precision simulation.
Key Takeaways

Next-Gen Tech: AI, Automation, and Optimization in molding (Moldex3D).

High Performance: Integrated SMC simulation (GM) and fiber morphology (BASF).

Precision Design: Conformal cooling (NyproMold) and thermal management for cold decks (Saint-Gobain).

Reality Check: Accuracy in thin-wall parts (Molex) and tooling verification (Moldex3D).

Thermal Accuracy: Enhanced simulation for thermal pins (TE).

Smart Electronics: Moving beyond standard FEA for plastics (Cadence).

Intelligent Workflow: AI-powered design improvement (Empower Operations).

Engineering Innovation: Material insights driven engineering (CMTech).

Admission is complimentary. Please refer to our website for further updates and detailed event information.
