Chase Plastics Free Webinar on Outdoor Plastics - Registration Open
2024-08-27 14:00 - 15:00 (America/New_York)
Join Chase Plastics on August 27 from 2 p.m.-3 p.m. (EST) for its FREE webinar on Outdoor Plastics.
Feel free to invite a friend or colleague to the webinar! Those who attend will receive a Certificate of Completion and a recording of the webinar. After registering, you will receive a confirmation email containing information about joining the webinar.

Can’t make it? No worries. Register for the webinar anyway, and Chase Plastics will send you a recording to watch at your leisure! Register by clicking the link: Outdoor Plastics webinar
FREE Technical Webinar Library
Discover our extensive collection of technical webinars, available for you to watch at your leisure…free of charge! Simply visit: https://chaseplastics.com/webinars/

Virtual Seminar - Paulson ProMolder Troubleshooting
2024-10-08 - 2024-10-11 | Paulson Plastics Academy a Certus Company
Paulson ProMolder Troubleshooting
Good to know: We offer a few select seminars online in a virtual classroom format. Check the schedule for details.
This is a 4-day virtual, live-streaming class, complete with Hands-on SimTech Injection Molding Simulation Lab Lessons
Paulson’s brand new virtual seminar is designed to train production personnel to recognize and analyze injection molded part problems and defects from a scientific molding point of view.
Paulson’s instructors will teach injection molders, mold designers, and part designers how to identify and correct 11 of the most common and costly molded part problems: Voids, Sink Marks, Short Shots, Flash, Weld (Knit) Lines, Splay (Silver Streaks), Jetting, Burn Marks, Warp, Cracks and Part Breakage, and Controlling Molded Part Dimensions.
Part defects are described and analyzed to show how each develops, including an explanation for the cause and affect method of problem analysis – a very valuable technique for analyzing and solving all types of production and management problems.
Interactive Lab Lessons Included
In addition, each participant will be engaged to solve specific part problems in a hands-on, interactive lab lesson using Paulson’s powerful injection molding machine simulation tool SimTech. This virtual, four-day seminar will give you the critical skills necessary to solve and troubleshoot any plastic part problem.
What can I expect for the virtual class?

Online classroom experience with high quality technical content
Web-based interactive training using Paulson’s virtual injection molding machine simulator SimTech™ (Learn more about SimTech here.)
Full day, week-long, intensive curriculum with assignments
Electronic study guides
Online testing for certification
Access to the instructor
Open class discussions with ability to interact with fellow participants

What do I need to attend the virtual class?

Just a computer with internet access.

Special note: No camera? No audio? No problem. You can still join in. Call in with your phone and use your computer to share the instructor’s screen.
Certification: Paulson Training Programs has an excellent reputation for developing highly qualified injection molding personnel who are sought after by the industry. To maintain this quality we test each student at the end of the course with a written exam. Grades 90% and above will earn a Gold Certificate of Achievement; 80% – 89% a Silver Certificate of Achievement; those achieving a 70%-79% will earn a Blue Certificate of Achievement, and all others earn a Certificate of Attendance.

Industry 4.0 in action: Enhancing efficiency, flexibility and innovation in manufacturing
2024-11-13 12:00 - 13:00 (America/Chicago)
Industry 4.0 offers unprecedented opportunities for growth, efficiency and innovation. As the manufacturing industry evolves, it’s important to embrace the right technologies and processes.
This webinar explains how manufacturers can integrate data, software and technology across their businesses to drive performance. Kate Brown and Cara Walton from Wipfli and Michael Thiessen from Tebis America will discuss:

Strategies for successful Industry 4.0 transitions.
How software drives manufacturing excellence (e.g., computer-aided design, computer-aided manufacturing and manufacturing execution systems).
Real results from manufacturing companies that integrated Industry 4.0 technologies.

Discover how to unlock your potential with industry-changing efficiencies and data-driven decisions. Register today.
Presenters
Kate Brown, Wipfli
Cara Walton, Wipfli
Michael Thiessen, Tebis America

MAPP Member Annual Meeting
2024-12-17 13:00 - 15:00 (America/Halifax)
MAPP Member Annual Meeting
December 17, 2024 1:00 PM ? Add to calendar

The MAPP Annual Meeting is held each year and brings together leaders from across the plastics industry to experience the benchmarking, problem-solving, and camaraderie that is the cornerstone of MAPP.
This virtual meeting will include important MAPP news, economic updates and more.
This virtual experience will include:
1:00 PM EDT – Welcome and Introductions
1:05 PM – An Update from Capitol Hill
Omar Nashashibi, Inside Beltway
1:50 PM – 2024 Industry Trends and Predictions
RTi
2:20 PM – Managing Legal Risk and Your Bottom Line
Phil Eckenrode, Benesch
2:50 PM EDT – MAPP Association Update
*Please note: A Zoom link will be included in the registration receipt.

New Session ProMolder Troubleshooting by Paulson A Certus Company
2025-02-04 08:00 - 2025-02-07 16:30 (America/Chicago)
New session available: February 4-7, 2025
In this instructor-led seminar, your injection molding professionals will learn to identify and correct 11 of the most expensive molded part problems. They’ll gain the ability to describe and analyze these common issues develop and use that critical knowledge to become troubleshooting whizzes.
This fully online course gives your team actionable troubleshooting tactics and the know-how to produce their best parts yet. ProMolder Troubleshooting:

Covers part defect analysis and resolution.
Is virtual, so your team can learn anywhere with a high-speed internet connection.
Gives your team 4 days with one of our expert instructors, during which they can ask questions and get a personalized experience.
Offers testing and certifications so your team can prove they have the skills to make an impact on operations.
Uses our injection molding simulator for virtual practice of new skills.

Join our instructors – virtually – February 4-7, 2025, for an engaging 4 days of troubleshooting training.
Call 877-978-7246
Email sales@tpctraining.com
Website paulsonplasticsacademy.com

You’ll be directed to check-out via TPC Training, fellow Certus technical skills training provider.

ProMolder 2: The next step after ProMolder 1
2025-02-10 09:30 - 2025-02-14 17:00 (America/Chicago)
ProMolder 2 is primarily an in-person seminar with our expert instructors, but we occasionally offer this popular training course virtually so your team can learn from anywhere with a high-speed internet connection. After completing ProMolder 1 and earning a Paulson Training Certificate, team members are ready for ProMolder 2, a 5-day intensive seminar.
Learn about critical injection molding topics such as:

Plastic properties and behaviors that impact part quality
Science behind successful molding
Analysis of part defects, causes, and solutions
Practice with our injection molding simulator
New math for molders
More topics included

Upcoming dates:
February 10-14 | Online
March 31-April 4 | Charlotte, NC
May 19-23 | Elk Grove Village, IL
Book via the TPC Training website

Beaumont Moldflow Webinar Series: Thermal Pins
2025-02-27 12:00 - 13:00 (America/New_York)
Thursday, February 27th, Noon (EST) – Mike Hall
Thermal Pins – How to Model and Why it Matters
Beaumont is holding this FREE webinar series showcasing tips, tricks, and some of the latest features Moldflow has to offer. Come listen in, ask questions and share with your co-workers! There are three remaining webinars each covering different Moldflow topics all starting at noon EST.
Thermal Pins – How to Model and Why it Matters
Thermal Pins are used in place of or in addition to baffles and bubblers to improve heat extraction from hot spot regions in injection molded parts. The evolution of injection molding flow simulation allows us to evaluate cooling lines within a mold before cutting steel, but can thermal pins be accurately modeled within the simulation? Proper modeling techniques are essential to differentiate between using a bubbler, baffle, or thermal pin in Moldflow to minimize hot spots across the cavity and avoid costly tool revisions.

MAPP Event: New Tools and Tactics for Your Automation Journey
2025-03-05 13:00 (America/New_York)
March 5, 2025 1:00 PM (EST)
Join us for an exclusive webinar as MAPP unveils a groundbreaking initiative designed to revolutionize automation adoption and implementation in the plastics industry. This must-attend event will showcase an innovative website portal that empowers industry leaders and automation professionals with unparalleled resources, including:

Emergency Outreach: Access a robust network for real-time support in critical moments.
Discussion Forum: Discuss best practices with your fellow members through MAPP’s online community
Skill Set Inventory: Connect with 500+ member companies to find experts who’ve tackled similar challenges.
Exclusive Video Library: Explore real-world automation solutions that inspire innovation and drive results.

Don’t miss this opportunity to gain a competitive edge, network with industry peers, and lead your company into the next era of automation excellence. Reserve your spot now!

Moldex3D Webinar: Effective Simulation Strategies to Minimize Warpage
2025-03-05 14:00 (America/New_York)
2:00 PM EDT | Wednesday, March 5, 2025
In the world of manufacturing, part warpage is a common challenge that can lead to costly defects and production delays. As industries strive for efficiency and quality, leveraging simulation tools becomes crucial in understanding and mitigating warpage issues before they arise. In this session, we will explore various simulation techniques that can predict and analyze warpage during the production process. We’ll discuss real-world case studies, showcasing how these strategies have successfully reduced warpage and improved overall product performance.
What will attendees learn?

What is the definition of Warpage and how can it be visualized in simulation?
Key result items to look for when trying to diagnose warpage issues.
How to separate material shrinkage from differential shrinkage?

Speaker Introduction
Ken Cheng is the Customer Manager at Moldex3D, with nearly 17 years of experience in the manufacturing industry and software solutions. A graduate with a master’s degree in Mechanical Engineering from The University of Texas at Arlington, KC is known for his expertise in handling complex molding simulations and client support. His dedication, knowledge, and client-centric approach have set a new standard in the industry, making him a valued mentor and professional in his field.
For more information and to register, visit www.moldex3d.com/events.

iD Zoom Chat: Spring Cleaning your Tool Room with Ethan Ravotti
2025-03-19 11:00 (America/Chicago)
Ethan Ravotti
Join iD Additives on 3/19 @ 11AM CST for a Zoom Chat to talk all things cleaning for your Tool Room. Ethan is going to give tips and tricks on how to get your Tool Room clean, organized, and more productive!
When: March 19th @ 11am CST
Where: Office, home, anywhere! This event is via Zoom
Click below to RSVP and iD Additives will email you a link to join on Zoom!

DELMIAWorks Webinar: Mastering Plastics Manufacturing
2025-03-19 11:00 (America/New_York)
Wednesday, March 19th, 11:00 AM ET

As an engineer in the plastics manufacturing industry, you know running your business with software not designed specifically to address the unique needs of plastics processing can be a very frustrating experience. There is a better way.
Join us on Wednesday, March 19th at 11:00 AM ET to learn how the most successful molders, extruders, compounders, thermoformers, and other plastics processors are overcoming the challenges of plastics manufacturing, including:

Managing family tools, tracking parison/flash and regrind, recipes/blends, and cavitation
Inventory management, including shelf-life, FIFO/LIFO, and raw materials
Knowing exactly what is running, where it is running, and for precisely how long
Scheduling tool and die-based, multi-level BOMs to reflect critical interdependencies

Learn how plastics manufacturers are leveraging DELMIAWorks to streamline operations, control costs, boost profitability, and stay competitive in a challenging market.

Beaumont Moldflow Webinar Series: Hot Gate Insulation
2025-03-20 12:00 - 13:00 (America/New_York)
Thursday, March 20th – Jerry Rooney
Hot Gate Insulation – Is the Default Assumption Safe?
Beaumont is holding this FREE webinar series showcasing tips, tricks, and some of the latest features Moldflow has to offer. Come listen in, ask questions and share with your co-workers! There are three remaining webinars each covering different Moldflow topics all starting at noon EST.
Hot Gate Insulation – Is the Default Assumption Safe?
By default, Moldflow assumes good insulation between Hot Gate elements and Part elements. Consequently, the mold temperature near the gate is quite uniform, and shows little evidence of the heat load from the nearby hot gate. The goal was to determine if manipulating the insulation properties of the hot gate produces notably different results in terms of packing and warpage. The results show increases in local shrinkage near the gates and slight changes to warpage magnitudes. Warpage trends remained the same in all scenarios. Additional simulations should be performed to determine the trends on a variety of materials and part designs. Lastly, future work should involve taking actual temperature measurements from a production tool and comparing to simulation outputs.

Polymer Mechanical and Chemical Testing - A FREE Webinar from Chase Plastics
2025-04-01 14:00 - 15:00 (America/New_York)
Join us for an insightful webinar focused on the mechanical and chemical testing of polymers. This webinar will delve into the essential techniques used for characterizing polymer materials and conducting failure analysis. You’ll gain a deeper understanding of how these testing methods reveal the performance, durability, and underlying issues in polymers. Whether you’re looking to enhance your knowledge of polymer behavior or improve your failure analysis strategies, this webinar is a must-attend!
Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.
FREE Technical Webinar Library
Discover our extensive collection of technical webinars, available for you to watch at your leisure…free of charge! Simply visit: https://chaseplastics.com/webinars/

Beaumont Moldflow Webinar Series: STAMP
2025-04-10 12:00 - 13:00 (America/Chicago)
Thursday, April 10th – Dave Corsi
STAMP – Shrinkage Test Adjusted Mechanical Properties
Beaumont is holding this FREE webinar series showcasing tips, tricks, and some of the latest features Moldflow has to offer. Come listen in, ask questions and share with your co-workers! There are three remaining webinars each covering different Moldflow topics all starting at noon EST.
STAMP – Shrinkage Test Adjusted Mechanical Properties
An accurate simulation is only as accurate as the information provided. One of the most important inputs in plastic flow simulation is the material file itself. If a material file is missing critical tested data, then the simulated results could be compromised. Simulation software generally uses a simplified thermo-viscous-elastic residual stress model due to the lack of good material data in anisotropic thermo-viscoelastic residual stress calculations and crystallization. This model has a constant solidification temperature with available material data obtained under laboratory conditions. It can generally provide acceptable results helping users optimize the processing conditions for mold and part design. However, model calibration and correction can further improve the predicted accuracy. Moldflow uses measured shrinkage data to improve the shrinkage and warpage prediction for Midplane and Dual Domain models known as CRIMS “Corrected Residual In-Mold Stress”. STAMP or “Shrinkage Test Adjusted Mechanical Properties” is a shrinkage correction model that will use the measured shrinkage data, obtained from rectangular plaque moldings, to calibrate modulus, Poisson’s Ratio, and Coefficient of Thermal Expansion (CTE). This new model gives additional accuracy for 3D simulations and is only available for Autodesk Moldflow.

Smart Innovation, Bigger Returns: Cutting Hidden Costs in Injection Molding
2025-05-20 13:00 - 14:00 (America/Halifax)
May 20, 2025 1:00 PM–2:00 PM EDT
Free Webinar Presented by Bob Reese, RJG

This presentation explores how molders can leverage advanced technology to uncover the hidden costs in the injection molding process. Attendees will learn how strategic investments in technology not only streamline operations but also generate high returns through increased efficiency, reduced waste, and improved product consistency. We will walk through real-life ROI examples and utilize a specialized calculator to demonstrate the tangible benefits these innovations can bring. Discover the significant savings potential of adopting these solutions to transform your business and maintain competitiveness in an evolving market.

FREE Webinar from Chase Plastics - Polymer Basics
2025-05-28 13:00 - 14:00 (America/Chicago)
May 28 at 1 p.m. – 2 p.m. (CDT)

Gain a clear understanding of polymers in this focused webinar covering their structure, types, and key physical and chemical properties. We’ll explore how polymers are classified, what makes them unique, and how their characteristics impact performance and applications across industries. This is Part One of the Plastics101 series.

Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

Moldex3D Webinar: Using Simulation to Optimize Injection Molding Cycle Time
2025-06-11 14:00 - 15:00 (America/Detroit)
Wed, Jun 11, 2025 at 2 PM (EDT)

In the realm of manufacturing, cycle time is a critical factor that directly impacts production capacity, cost-effectiveness, and overall competitiveness. With the ever-increasing demand for faster turnaround and improved efficiency, it has become imperative to harness the power of simulation to optimize injection molding cycle time.
Whether you are a design engineer, production manager, or industry professional looking to enhance your knowledge and skills in injection molding optimization, this webinar promises to provide you with invaluable insights and practical solutions to elevate your manufacturing processes.
What Attendees Will Learn?

Understanding the significance of cycle time in injection molding and its impact on production efficiency and profitability.
Unveiling the powerful simulation tools and methodologies available to accurately predict and optimize cycle time.
Demonstrating real-world case studies, expert tips, and best practices showcasing successful outcomes in using simulation to optimize injection molding cycle time.

Mr. Anand Bora is an alumnus of the University of Massachusetts, Lowell. He received a BS in Polymer Engineering in 1998 and an MS in Plastics Engineering in 2000. During his 20 years in the automotive industry, he has worked at OEMs, tier-1, and tier-2 suppliers in Design, Manufacturing, and Business Development. He is very knowledgeable not only in injection molding and compression molding, but also in blow molding, Dimensional Management, and Virtual Reality. At Moldex3D, he is involved in ensuring customers’ success, meaning your success.

Chase the Knowledge Webinar: Understanding Polymer Modification (Part Two of the Chase Plastics 101 five-part series)
2025-06-25 02:00 - 15:00 (America/Detroit)
Wed, Jun 25, 2025 2:00 PM – 3:00 PM EST

Join us for an informative webinar on Polymer Modification, where you’ll gain a foundational understanding of how polymers are tailored for specific applications. This session will cover the various types of polymer modification, including a review of blends, alloys, and copolymers. We’ll also explore the roles of reinforcements, fillers, and impact modifiers, and take a closer look at common additives and stabilizers used to enhance polymer performance. This is Part Two of the Plastics101 series. Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

Moldex3D Webinar, Moldiverse: The Cloud Ecosystem Elevating Your Molding
2025-06-25 14:00 (America/Detroit)
Wed, Jun 25, 2025｜2:00 PM EDT
In plastic injection molding process, several critical factors must be considered. Material property, injection molding machine process parameters, and the level of expertise all interact and have an effect on the final production outcome.
To elevate the quality of your simulation and injection molded parts, Moldex3D launched the cloud platform, Moldiverse, as an ecosystem offering material databank, smart molding solutions, online learning resources, and trial software. The material databank, Material Hub Cloud, offers more than 8,700 thermoplastics and you can find, compare, look for alternative materials with just a few clicks. iMolding Hub provides machine characterization that allows your simulation to take into account the actual machine’s response and potentially reduce the number of mold trials. University, the online learning resources hub, provides Moldex3D software training, plastic E-learning, and on-demand webinars, all can be accessed anytime, anywhere. Join the webinar to find out what Moldiverse can bring you to make your simulation smarter, faster, and more elevated.
What will attendees learn?

What is Moldiverse
What can Moldiverse bring you
Why should you join Moldiverse

Speaker Intro

What's New in Moldex3D 2025
2025-07-23 14:00 - 15:00 (America/Detroit)
Wed, Jul 23, 2025｜2:00 PM EDT

Every year, Moldex3D releases a new major version, which includes the latest and greatest features that were developed over the past year! For the Moldex3D 2025 release, we are excited to announce numerous upgrades to the current platform:

1.AI Optimization for DOE Analysis

2.New GD&T Tools

3.Weld Lines Output as Surfaces

4.User-defined Result Criteria

5.Cooling Channel Loop Wizard

6.View Cube & Unit System Mobility

…and MUCH MORE!!
What will attendees learn?

New Solver Capabilities & Database Support Options
Enhanced & Newly Added Pre-processing Tools
Updates to Project Management & Automation
Additional Upgrades to Already Existing Modules

Alex has been with Moldex3D for nearly nine years. In addition to being an excellent senior engineer, he is responsible for training users to become proficient with our software and sharing various practical tips to help them use it more effectively. Alex is also an outstanding speaker, frequently hosting presentations on software functionalities, earning widespread recognition and praise.​

Chase the Knowledge Webinar: Polymer Testing (Part Three of the Chase Plastics 101 five-part series)
2025-07-30 14:00 - 15:00 (America/Detroit)
Wed, Jul 30, 2025 2:00 PM – 3:00 PM EST

Join us for an informative webinar on Polymer Testing, where you’ll get a clear understanding of what polymer test data really means. In this webinar, we’ll walk through how to read a Technical Data Sheet (TDS), review key material properties, and explain the most common tests used in polymer evaluation. Learn how to translate test results into practical insights for material selection and performance. This is Part 3 of the “Chase Plastics 101” series. Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

Moldex3D Webinar: Bridging the Gap Aligning Simulated and Real-World Pressure Data
2025-08-20 14:00 - 15:00 (America/Detroit)
Date：Aug 20, 2025
Time： 2:00 PM EDT

In high-pressure applications like injection molding, accurately predicting pressure loss across the entire system is critical for diagnosing and preventing molding issues. While many focus solely on maximum pressure values, it’s the pressure trends and contours that offer the most insight into flow behavior, imbalance, and potential defects.
This webinar will explore how to interpret pressure distribution more effectively using Moldex3D, helping you uncover root causes of issues such as short shots, warpage, or excessive clamp force requirements. Learn how to go beyond surface-level metrics and leverage full pressure analysis to make smarter design and process decisions—before you mold.
What will attendees learn?

How to identify and eliminate common LSR/ silicone molding issues—such as air traps, flashing, short shots, and uneven curing—through simulation.
Gain practical strategies to improve simulation accuracy through better material data, boundary condition settings, and interpretation of pressure contours and trends.

Chase the Knowledge Webinar: Polymer Fabrication 101 (Part Four of the Chase Plastics 101 five-part series)
2025-08-27 11:00 - 12:00 (America/Denver)
Wed, Aug 27, 2025 11:00 AM – 12:00 PM MST / 1:00 PM – 2:00 PM CST / 2:00 PM – 3:00 PM EDT

This webinar provides an overview of key polymer fabrication methods, including extrusion, blow molding, thermoforming, and injection molding. You’ll learn how each process works, along with a general understanding of how raw materials are converted into finished plastic products. This is Part 4 of the “Chase Plastics 101” series. Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

FREE Technical Webinar Library
Discover our extensive collection of technical webinars, available for you to watch at your leisure…free of charge! Simply visit: https://chaseplastics.com/webinars/

Federated Complimentary Webinar: Cybersecurity
2025-09-18 13:00 - 13:30 (America/Chicago)
Cybersecurity
Thursday, September 18, 2025 (1:00 PM Central)
30 minutes | Complimentary | Advance registration required
The webinar covers emerging cybersecurity threats, such as ransomware attacks and AI-powered phishing. It also highlights trends like double extortion, Ransomware-as-a-Service (RaaS), and attacks on critical infrastructure. The presentation will feature case studies of major ransomware incidents, including the CNA Financial and Royal Mail attacks, and emphasizes the need for strong cybersecurity measures to defend against these threats.
WHAT YOU WILL LEARN
➤ The latest tactics cybercriminals use, including AI-generated phishing emails and deepfake videos.
➤ Insights into how you could prepare for and respond to ransomware attacks, such as regular risk assessments and a layered security approach.
➤ Why employee training and awareness are vital for stopping cyberattacks, as well as the importance of ongoing monitoring and incident response planning.
➤ Tips for getting started with cybersecurity, including how to choose the right provider and tools for your business.
WHO SHOULD ATTEND

Business Owners / Operators
Risk Managers
Operations Managers
HR Professionals

Chase the Knowledge® Webinar: Common Polymers 101 (Part Five of the Chase Plastics 101 five-part series)
2025-09-24 14:00 - 15:00 (America/Detroit)
Wed, Sep 24, 2025 2:00 PM – 3:00 PM EST

Join us for the Common Polymers 101 webinar on September 24th, where we’ll take a closer look at widely used plastics in manufacturing. This session includes a quick review of material selection and dives into commodity polymers, ABS, Nylon 6 & 6/6, PC, TPEs, and specialty polymers—offering practical insight to help you choose the right resin for your end-use applications. This is the final part of the “Chase Plastics 101” series. Those who attend LIVE will receive a Certificate of Completion and a recording of the webinar. Can’t join us live? Register anyway, and we will send you the on-demand recording to view at your convenience upon the conclusion of the webinar.

RJG Training Webinar: Getting the Most out of CoPilot and Hub
2025-12-02 - 2025-12-04
Are you taking full advantage of your CoPilot and Hub systems? Join us December 2–4 for a free, three-day online course designed to help you unlock their full potential. Our experts will guide you through key features, best practices, and real-world examples that can help you boost part quality, improve process control, and streamline your mold change workflow.
Course Length: 3 days — 1 hour per day
Cost: Free
✅ DAY 1 🔍 Real-Time Monitoring & Alarm Strategies: Improve Quality • Learn how to efficiently view and analyze data using the CoPilot’s Cycle Graph, Summary Graph, and Previous Cycle Values. • Master tools for zooming, adjusting, and toggling multiple views, including showing individual curves with click-and-hold functionality. 🚨 Alarms: Set with Precision, Act with Confidence • Understand how to manually set alarms using high/low limits, percentages, and sigma levels. • Discover best practices for alarm settings to ensure stability, fill volume accuracy, and consistency. • Walk through real-world examples of both machine and mold alarms for practical context.
✅DAY 2 🧩 Templates & Balance Viewer: Faster Setups • What is a template and why it matters. • How to retrieve, create, select, archive, and overwrite templates with ease. • Tips for maintaining good practices in template use to support repeatability and mold setup efficiency. ⚖️ Balance Viewer: Fill and Pressure Insights
✅DAY 3 🔍Advanced Data Analysis: Detect Problems Early • View real-time and historical data from all connected CoPilot systems. • Analyze Cycle Graphs, Summary Graphs, and Previous Cycle Values to evaluate process health. • Identify drift or anomalies before they lead to part defects. • Use zoom, curve toggling, and overlay features for in-depth cycle analysis. 📈 Identify Opportunities for Improvement • Compare job performance across tools, presses, or shifts. • Spot patterns that correlate with downtime, rejects, or excessive alarm triggers. • Use HUB insights to guide continuous improvement efforts, training, and process audits.
