Plastics Machinery Shipments Rise in Q2

Plastics Machinery Shipments Rise in Q2

SPI: The Plastics Industry Trade Association

For the third straight quarter, North American shipments of plastics machinery registered a year-over-year increase in Q2 of 2016 according to statistics compiled and reported by the SPI: the Plastics Industry Trade Association’s Committee on Equipment Statistics (CES).

Shipments of primary plastics equipment (injection molding, extrusion and blow molding equipment) for reporting companies totaled $312.1 million in the second quarter. This was 2.0 percent higher than the total of $306.1 million from Q2 of 2015, but it was 5.6 percent less than the $330.5 million from Q1 of 2016. For the year-to-date, shipments of primary plastics equipment are up 7.6 percent when compared with the first two quarters of 2015.

“The upward trend in the machinery data continued in the second quarter, but the year-over-year growth rate moderated,” said Bill Wood, of Mountaintop Economics & Research, Inc. – the plastics market economist who analyzes and reports on the plastics machinery market for the CES. “The quarterly comparisons will become more difficult in the coming quarters, so the trend of gradual moderation in the growth rate will likely continue. But the incentives to invest in new equipment will persist, so the shipments totals are expected to stay close to the current levels.”

Primary Plastics Equipment Shipments

When this data is broken out by reporting sector, there was again a wide variance in the quarterly totals. The shipments value of injection molding machinery escalated 7.3 percent in Q2 of this year when compared with the total from Q2 of 2015. The shipments value of single-screw extruders increased 12.4 percent in Q2 when compared with Q2 of 2015. The shipments value of twin-screw extruders (which includes both co-rotating and counter-rotating machines) dropped 35.6 percent in Q2 when compared with the same quarter last year. The shipments value of blow molding machines decreased 17.3 percent in Q2 when compared with Q2 of 2015.

New bookings of auxiliary equipment for reporting companies totaled $123.8 million dollars in Q2 of 2016. This represented a rise of 1.4 percent over the total from Q2 of 2015, and it was a gain of 3.0 percent when compared with the total from Q1 of this year.

The long-term, upward trend in the CES data corresponds with the prevailing trends in the two major data series compiled by the US government that measure overall demand for industrial machinery. According to the Bureau of Economic Analysis, business investment in industrial equipment escalated 2.4 percent (seasonally-adjusted, annualized rate) in Q2 of 2016 when compared with Q2 of 2015. This follows a gain of 3.3 percent in the first quarter of this year.

According to data compiled by the Census Bureau, the total value for new orders of industrial machinery slipped a bit (<1 percent) in Q2 of 2016 when compared with the total from Q2 of 2015. This followed a rise of 15.8 percent in the first quarter of this year.

“Gains in the US GDP were disappointing in the first half of 2016, but economic growth will be closer to the long-term trend in the second half of the year. This means consumer demand for plastics products will gradually increase for the foreseeable future. Our outlook for the economy is little changed – annual, real GDP growth will be in the range of two percent due primarily to a slow but steady improvement in wages and household incomes resulting from stronger employment levels,” Wood said.

The CES also conducts a quarterly survey of plastics machinery suppliers that asks about present market conditions and expectations for the future. According to the Q2 survey, 77 percent of respondents expect market conditions to either hold steady or get better during the next 12 months. This is down from 84 percent in the previous quarter.

The outlook for global market conditions also moderated in the second quarter. Europe has emerged as the region with the strongest expectations for improvement in the coming year. Mexico and North America are expected to be steady-to-better. The outlooks for Asia and Latin America are less optimistic than they were last quarter, but the majority still expects that conditions will hold mostly steady.

As for the major end-markets, the respondents to the Q2 survey expect that medical and packaging will enjoy the strongest growth in demand for plastics products and equipment in the coming year. The expectations for the automotive market are mixed. Expectations for all other end-markets call for steady-to-better demand to prevail in 2016.

For more information, visit